Test/glk bobba regression - take 2 #4765
Closed
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
XPS 9530 has 2 tweeters and 2 subwoofers powered by CS35L41 amplifier, SPI connected. For subwoofers to work, it requires both to enable amplifier support, and to enable output to subwoofers via 0x17 quirk (similalry to XPS 9510/9520). Signed-off-by: Aleksandrs Vinarskis <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
Lenovo M90 Gen5 is equipped with ALC897, and it needs ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work. Signed-off-by: Bin Li <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
Volume can have ranges that start with negative values, ex: -84dB to +40dB. Apply correct range check in snd_soc_limit_volume before setting the platform_max. Without this patch, for example setting a 0dB limit on a volume range of -84dB to +40dB would fail. Signed-off-by: Srinivas Kandagatla <[email protected]> Tested-by: Johan Hovold <[email protected]> Reviewed-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Limit the speaker digital gains to 0dB so that the users will not damage them. Currently there is a limit in UCM, but this does not stop the user form changing the digital gains from command line. So limit this in driver which makes the speakers more safer without active speaker protection in place. Signed-off-by: Srinivas Kandagatla <[email protected]> Reviewed-by: Johan Hovold <[email protected]> Tested-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Most of the ES83xx codec configuration is exposed in the DSDT table and accessible via a _DSM method. Start adding basic definitions and helpers to dump the information. Reviewed-by: Mauro Carvalho Chehab <[email protected]> Co-developed-by: David Yang <[email protected]> Signed-off-by: David Yang <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Instead of adding DMI quirks for each new tablet model which uses the ESS8316 codec, the plan is to switch to querying the same ACPI Device-Specific-Method (DSM) as Windows uses to determine things like speaker and mic routing. Call the new es83xx_dsm_dump() helper which logs various basic settings which can be queried through the ACPI DSM method on the codec ACPI device, this is intended to help with developing a DSM based solution to replace most DMI quirks. Signed-off-by: Pierre-Louis Bossart <[email protected]> [[email protected]: improve commit message] Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Add a is_bytcr helper variable to probe(). This is a preparation patch for determining the quirks through querying the ACPI Device-Specific-Method (DSM) on the codec-device. Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
…CPI DSM Add support for querying the same ACPI Device-Specific-Method (DSM) as Windows uses to determine things like speaker and mic routing. This avoids the need to add DMI quirks for each new ESS8316 tablet model. This has been tested on the following devices: 1. Chuwi Hi12 CHT with stereo speakers and IN2-mic-map, this avoids the need to add a DMI quirk for this model. 2. Nanote UMPC-01 CHT with stereo speakers and IN1-mic-map, the existing DMI quirk is still necessary because of a bug in the DSM return values for the speakers (it returns mono). 3. Onda V80 plus CHT with mono speaker and IN1-mic-map, DSM set quirks match the previously used defaults. 4. GP-electronic T701 BYT with mono speaker and IN2-mic-map, DSM set quirks match the previously used defaults. Signed-off-by: Hans de Goede <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Merge series from Hans de Goede <[email protected]>: This takes some of the work done to auto-configure quirks/routing for ESS83xx codecs by getting the info from ACPI from: thesofproject#4112 And then builds on top of this to add auto-configuration to the bytcht_es8316 board driver. Note compared to the pull-request, which deals with the ES8336, this series deals with the ES8316 (for which I have several devices to test on) and this moves handling of the _DSM from the codec driver to the board driver since with the ES8316 the board driver takes care of setting up various routes for things like the mic and speakers. After this series audio now works properly on a CHT Chuwi Hi12 tablet without needing to add an extra quirk for that model. This has also been tested on the following devices, where things are unchanged from before (the ACPI autoconfiguration gives the same results as the old defaults) : Onda V80 plus (CHT) GP-electronic T701 (BYT) I also tested this on a Nanote UMPC-01, here the _DSM result for PLATFORM_SPK_TYPE_ARG wrongly returns 1 (mono) while the device actually has 2 speakers, so this model needs to keep its DMI quirk. I don't have an IRBIS NB41 nor a TECLAST X98 Plus II, so the DMI quirks for those are left in place too on a better safe then sorry basis.
This is a test configuration for UpExtreme with Cirrus Logic
CS35L56-EIGHT-C board.
The codec layout is configured as:
- Link3: CS42L43 Jack
- Link0: 2x CS35L56 Speaker (amps 1 and 2)
- Link1: 2x CS35L56 Speaker (amps 7 and 8)
Signed-off-by: Bard Liao <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Signed-off-by: Richard Fitzgerald <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Merge series from [email protected]: Limit the speaker digital gains to 0dB so that the users will not damage them. Currently there is a limit in UCM, but this does not stop the user form changing the digital gains from command line. So limit this in driver which makes the speakers more safer without active speaker protection in place. Apart from this there is also a range check fix in snd_soc_limit_volume to allow setting this limit correctly. Tested on Lenovo X13s.
Many board configs are duplicated since codec and amplifier type are removed from board quirk. Introduce "adl_nau8825_def" board to reduce the number of adl board configs. Reviewed-by: Bard Liao <[email protected]> Signed-off-by: Brent Lu <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Many board configs are duplicated since codec and amplifier type are removed from board quirk. Introduce "rpl_nau8825_def" board to reduce the number of rpl board configs. Reviewed-by: Bard Liao <[email protected]> Signed-off-by: Brent Lu <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
The drv_name in enumeration table for ALC5682I-VS codec does not match the board id string in machine driver. Modify the entry of "10EC5682" to enumerate "RTL5682" as well and remove invalid entry. Fixes: 88b4d77 ("ASoC: Intel: glk_rt5682_max98357a: support ALC5682I-VS codec") Reported-by: Curtis Malainey <[email protected]> Reviewed-by: Curtis Malainey <[email protected]> Reviewed-by: Bard Liao <[email protected]> Signed-off-by: Brent Lu <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
sof_sdw_rt_sdca_jack_exit() are used by different codecs, and some of them use the same dai name. For example, rt712 and rt713 both use "rt712-sdca-aif1" and sof_sdw_rt_sdca_jack_exit(). As a result, sof_sdw_rt_sdca_jack_exit() will be called twice by mc_dailink_exit_loop(). Set ctx->headset_codec_dev = NULL; after put_device(ctx->headset_codec_dev); to avoid ctx->headset_codec_dev being put twice. Fixes: 5360c67 ("ASoC: Intel: sof_sdw: add rt712 support") Reviewed-by: Péter Ujfalusi <[email protected]> Signed-off-by: Bard Liao <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
…v instead of playback 'if (!playback)' will not work if the dai is only on capture dai link or is on more than one playback dai links. Check 'if (ctx->headset_codec_dev)' instead. Reviewed-by: Péter Ujfalusi <[email protected]> Signed-off-by: Bard Liao <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
… DAI widget We use partial match for connecting DAI link and DAI widget. We need to use partial match for disconnecting, too. Fixes: fe88788 ("ASoC: SOF: topology: Use partial match for connecting DAI link and DAI widget") Reviewed-by: Ranjani Sridharan <[email protected]> Signed-off-by: Bard Liao <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Add missed definition and align variable names with sof topology header file. Signed-off-by: Baofeng Tian <[email protected]> Reviewed-by: Bard Liao <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
sof header file requires these struct with 4 byte aligned, so add same alignment in sof driver definition. Signed-off-by: Baofeng Tian <[email protected]> Reviewed-by: Bard Liao <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Buffer flags have been in firmware for ages but were never fully implemented in the topology/kernel system. This commit finishes off the implementation. Reviewed-by: Ranjani Sridharan <[email protected]> Signed-off-by: Curtis Malainey <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
The RT722 SDCA codec supports 3 data lanes, lane_control_support property has to be set to use additional two lanes. Reviewed-by: Jack Yu <[email protected]> Reviewed-by: Rander Wang <[email protected]> Signed-off-by: Chao Song <[email protected]> Signed-off-by: Bard Liao <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
There is a spelling mistake in a dev_err_probe error message. Fix it. Signed-off-by: Colin Ian King <[email protected]> Acked-by: Charles Keepax <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Driver uses get and set ops to change the power state of dsp core. Closes: thesofproject/sof#8478 Signed-off-by: Rander Wang <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Hookup the CS35L56 DAPM_OUTPUT widgets to a DAPM_SPK widget so that there is a complete logical path to a speaker. There is no particular reason to use multiple speaker widgets. The CS35L56 are designed to work together as a set so they have all been connected to a single speaker widget. Instead of a hardcoded list of codec widget names, the code walks through all the codecs on the dailink and for every cs35l56 it uses its name prefix to construct the source end of the route. This adds a small amount of overhead during probe but has the benefit that it isn't dependent on every system using the same prefixes. Signed-off-by: Richard Fitzgerald <[email protected]> Acked-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Charles Keepax <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
The pcm state can be SNDRV_PCM_STATE_DISCONNECTED at disconnect callback, and there is not an entry of SNDRV_PCM_STATE_DISCONNECTED in snd_pcm_state_names. This patch adds the missing entry to resolve this issue. cat /proc/asound/card2/pcm0p/sub0/status That results in stack traces like the following: [ 99.702732][ T5171] Unexpected kernel BRK exception at EL1 [ 99.702774][ T5171] Internal error: BRK handler: f2005512 [thesofproject#1] PREEMPT SMP [ 99.703858][ T5171] Modules linked in: bcmdhd(E) (...) [ 99.747425][ T5171] CPU: 3 PID: 5171 Comm: cat Tainted: G C OE 5.10.189-android13-4-00003-g4a17384380d8-ab11086999 thesofproject#1 [ 99.748447][ T5171] Hardware name: Rockchip RK3588 CVTE V10 Board (DT) [ 99.749024][ T5171] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 99.749616][ T5171] pc : snd_pcm_substream_proc_status_read+0x264/0x2bc [ 99.750204][ T5171] lr : snd_pcm_substream_proc_status_read+0xa4/0x2bc [ 99.750778][ T5171] sp : ffffffc0175abae0 [ 99.751132][ T5171] x29: ffffffc0175abb80 x28: ffffffc009a2c498 [ 99.751665][ T5171] x27: 0000000000000001 x26: ffffff810cbae6e8 [ 99.752199][ T5171] x25: 0000000000400cc0 x24: ffffffc0175abc60 [ 99.752729][ T5171] x23: 0000000000000000 x22: ffffff802f558400 [ 99.753263][ T5171] x21: ffffff81d8d8ff00 x20: ffffff81020cdc00 [ 99.753795][ T5171] x19: ffffff802d110000 x18: ffffffc014fbd058 [ 99.754326][ T5171] x17: 0000000000000000 x16: 0000000000000000 [ 99.754861][ T5171] x15: 000000000000c276 x14: ffffffff9a976fda [ 99.755392][ T5171] x13: 0000000065689089 x12: 000000000000d72e [ 99.755923][ T5171] x11: ffffff802d110000 x10: 00000000000000e0 [ 99.756457][ T5171] x9 : 9c431600c8385d00 x8 : 0000000000000008 [ 99.756990][ T5171] x7 : 0000000000000000 x6 : 000000000000003f [ 99.757522][ T5171] x5 : 0000000000000040 x4 : ffffffc0175abb70 [ 99.758056][ T5171] x3 : 0000000000000001 x2 : 0000000000000001 [ 99.758588][ T5171] x1 : 0000000000000000 x0 : 0000000000000000 [ 99.759123][ T5171] Call trace: [ 99.759404][ T5171] snd_pcm_substream_proc_status_read+0x264/0x2bc [ 99.759958][ T5171] snd_info_seq_show+0x54/0xa4 [ 99.760370][ T5171] seq_read_iter+0x19c/0x7d4 [ 99.760770][ T5171] seq_read+0xf0/0x128 [ 99.761117][ T5171] proc_reg_read+0x100/0x1f8 [ 99.761515][ T5171] vfs_read+0xf4/0x354 [ 99.761869][ T5171] ksys_read+0x7c/0x148 [ 99.762226][ T5171] __arm64_sys_read+0x20/0x30 [ 99.762625][ T5171] el0_svc_common+0xd0/0x1e4 [ 99.763023][ T5171] el0_svc+0x28/0x98 [ 99.763358][ T5171] el0_sync_handler+0x8c/0xf0 [ 99.763759][ T5171] el0_sync+0x1b8/0x1c0 [ 99.764118][ T5171] Code: d65f03c0 b9406102 17ffffae 94191565 (d42aa240) [ 99.764715][ T5171] ---[ end trace 1eeffa3e17c58e10 ]--- [ 99.780720][ T5171] Kernel panic - not syncing: BRK handler: Fatal exception Signed-off-by: Jason Zhang <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
Merge series from Pierre-Louis Bossart <[email protected]>: Minor cleanups for machine drivers.
Merge series from Pierre-Louis Bossart <[email protected]>: Header alignment with firmware, addition of new token and partial match filters.
…/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.7 A crop of fixes for v6.7, one core fix for a merge issue and a bunch of driver specific fixes and new IDs, mostly for x86 platforms.
The Framework Laptop 13 (AMD Ryzen 7040Series) has an ALC295 with a disconnected or faulty headset mic presence detect similar to the previous models. It works with the same quirk chain as 309d736. This model has a VID:PID of f111:0006. Signed-off-by: Tim Bosse <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
Unlike i.MX8MP, i.MX93 has two XCVR interrupts. Describe the two interrupts for the i.MX93 to fix the following dt-schema warning: imx93-11x11-evk.dtb: xcvr@42680000: interrupts: [[0, 203, 4], [0, 204, 4]] is too long from schema $id: http://devicetree.org/schemas/sound/fsl,xcvr.yaml# Signed-off-by: Fabio Estevam <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Pull CS35L41 codec updates for Lenovo laptops. Signed-off-by: Takashi Iwai <[email protected]>
Make calibration functions configurable to support different calibration data storage modes. Signed-off-by: Gergo Koteles <[email protected]> Link: https://lore.kernel.org/r/5859c77ffef752b8a9784713b412d815d7e2688c.1703891777.git.soyer@irl.hu Signed-off-by: Takashi Iwai <[email protected]>
Make the global i2c address configurable to support compatible amplifiers with different global i2c address. Signed-off-by: Gergo Koteles <[email protected]> Link: https://lore.kernel.org/r/a252f1efeed5049f027f01e699c9e10e1e05bf9e.1703891777.git.soyer@irl.hu Signed-off-by: Takashi Iwai <[email protected]>
The INT8866 belongs to the Lenovo Yoga 7 Gen 7 AMD 14ARB7
laptop. It has two TAS2563 amplifier. Add the PNP ID
and calibration functions to handle them.
ACPI excerpt:
Scope (_SB.I2CD)
{
Device (TAS)
{
Name (_HID, "INT8866") // _HID: Hardware ID
Name (_UID, Zero) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
I2cSerialBusV2 (0x004C, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2CD",
0x00, ResourceConsumer, , Exclusive,
)
I2cSerialBusV2 (0x004D, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2CD",
0x00, ResourceConsumer, , Exclusive,
)
GpioInt (Edge, ActiveLow, SharedAndWake, PullNone, 0x0000,
"\\_SB.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0020
}
})
Return (RBUF) /* \_SB_.I2CD.TAS_._CRS.RBUF */
}
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
}
Signed-off-by: Gergo Koteles <[email protected]>
Link: https://lore.kernel.org/r/3b8d4c602e1a46922f53bc9afc8b705d55aa4872.1703891777.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <[email protected]>
The 14ARB7 has two tas2563 amplifier on i2c. Connect it to the tas2781 driver. Signed-off-by: Gergo Koteles <[email protected]> Link: https://lore.kernel.org/r/abce9ee55689523562feb72383377171a489ddc7.1703891777.git.soyer@irl.hu Signed-off-by: Takashi Iwai <[email protected]>
This adds overrides for a series of notebooks using a common config taken from HP's proprietary Windows driver. This has been tested on a HP 15-ey0xxxx device (subsystem 103C8A31) together with another Realtek quirk and the calibration files from the proprietary driver. Signed-off-by: Lorenz Brun <[email protected]> Cc: <[email protected]> # v6.7 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
Pull updates for CS35L41 codec for HP models. Signed-off-by: Takashi Iwai <[email protected]>
The ac97_bus_type structure is no longer declared in this file:
sound/ac97/bus.c: In function 'ac97_codec_add':
sound/ac97/bus.c:112:27: error: 'ac97_bus_type' undeclared (first use in this function); did you mean 'bus_type'?
112 | codec->dev.bus = &ac97_bus_type;
| ^~~~~~~~~~~~~
| bus_type
sound/ac97/bus.c:112:27: note: each undeclared identifier is reported only once for each function it appears in
sound/ac97/bus.c: In function 'snd_ac97_codec_driver_register':
sound/ac97/bus.c:191:28: error: 'ac97_bus_type' undeclared (first use in this function); did you mean 'ac97_bus_reset'?
191 | drv->driver.bus = &ac97_bus_type;
Include the header that contains the declaration and make sure the definition
is const but not static.
Fixes: 66e82d2 ("ALSA: mark all struct bus_type as const")
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Collaborator
|
https://sof-ci.01.org/linuxpr/PR4765/build905/devicetest/index.html does look better! All green. |
bardliao
previously approved these changes
Jan 8, 2024
Collaborator
|
@ujfalusi We also need diff --git a/sound/soc/intel/boards/bxt_rt298.c b/sound/soc/intel/boards/bxt_rt298.c
index 4631106f2a28..a56fa60b55b1 100644
--- a/sound/soc/intel/boards/bxt_rt298.c
+++ b/sound/soc/intel/boards/bxt_rt298.c
@@ -604,6 +604,8 @@ static int broxton_audio_probe(struct platform_device *pdev)
int i;
for (i = 0; i < ARRAY_SIZE(broxton_rt298_dais); i++) {
+ if (!card->dai_link[i].codecs || !card->dai_link[i].codecs->dai_name)
+ continue;
if (!strncmp(card->dai_link[i].codecs->name, "i2c-INT343A:00",
I2C_NAME_SIZE)) {
if (!strncmp(card->name, "broxton-rt298", |
…hange The change to avoid dummy components will leave the component name and dai_name NULL which will cause NULL dereference when trying to access to it in the machine driver when applying fixups. Link: thesofproject#4759 (comment) Fixes: 13f5826 ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()") Signed-off-by: Peter Ujfalusi <[email protected]>
The change to avoid dummy components will leave the component name and dai_name NULL which will cause NULL dereference when trying to access to it in the machine driver when applying fixups. Link: thesofproject#4759 (comment) Fixes: 13f5826 ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()") Signed-off-by: Peter Ujfalusi <[email protected]>
b54dc99 to
a7d5305
Compare
Collaborator
Author
|
Changes since v1:
|
Collaborator
|
Fixes submitted upstream: and in #4759 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Expanding on #4764 with the following diff now:
Hoping better results on solving the bad kernel oops reported in #4759