Makemkv changed drive recognition

[tobbenb]

Hi.
Not sure if you noticed, but the drive recognition is change from version 1.10.9. This means that you will have to pass through the correct /dev/sg* device to the container also for the drive to be found.
So both /dev/sg* and /dev/sr* is needed. The Makemkv author said that leaving out the /dev/sr* device will impact performance.
See here http://www.makemkv.com/forum2/viewtopic.php?f=3&t=16939&view=unread#p59822

[TonyBrobston]

@tobbenb I too found this to be the case. I'm glad you posted, it took me quite a bit to finally look in the issues tab to see your post and after trying to add sg's it helped.

My drives are /dev/sr0 and /dev/sr1, however my sg's were /dev/sg0 and /dev/sg3. I was surprised I couldn't just say /dev/sr* and /dev/sg*, docker didn't seem to like that.

I did a little googling and found that this works, however it's a lot of code for something so trivial. Something along the lines of:
docker run $(for dev in /dev/sr*; do echo -n "--device $dev "; done) $(for dev in /dev/sg*; do echo -n "--device $dev:$dev "; done) lasley/node-makemkv:latest

I've now gotten past this hurdle, but am having another issue.