dts: eswin: Update upstreaming drivers nodes

arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts

@@ -6,18 +6,291 @@
 /dts-v1/;
 
 #include "eic7700.dtsi"
+#include "eic7700-pinctrl.dtsi"
 
 / {
 	compatible = "sifive,hifive-premier-p550", "eswin,eic7700";
 	model = "SiFive HiFive Premier P550";
 
 	aliases {
+		mmc0 = &sdhci_emmc;
+		mmc1 = &sdio0;
+		mmc2 = &sdio1;
 		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x20000000>;
+			alignment = <0x0 0x1000>;
+			linux,cma-default;
+		};
+	};
+
+	vcc_1v8: vcc1v8 {
+		 compatible = "regulator-fixed";
+		 regulator-name = "vcc1v8";
+		 regulator-always-on;
+		 regulator-boot-on;
+		 regulator-min-microvolt = <1800000>;
+		 regulator-max-microvolt = <1800000>;
+	 };
+};
+
+&xtal24m {
+	clock-frequency = <24000000>;
+	clock-output-names = "xtal24m";
+};
+
+&gpio0_pins {
+	bias-disable;
+	input-enable;
+};
+
+&gpio5_pins {
+	bias-disable;
+	input-enable;
+};
+
+&gpio11_pins {
+	bias-disable;
+	input-enable;
+};
+
+&gpio14_pins {
+	bias-pull-up;
+	input-disable;
+};
+
+&gpio15_pins {
+	bias-disable;
+	input-enable;
+};
+
+&gpio28_pins {
+	bias-disable;
+	input-enable;
+};
+
+&gpio43_pins {
+	bias-disable;
+	input-disable;
+};
+
+&gpio71_pins {
+	bias-pull-up;
+	input-disable;
+};
+
+&gpio74_pins {
+	bias-pull-up;
+	input-disable;
+};
+
+&gpio76_pins {
+	bias-disable;
+	input-disable;
+};
+
+&gpio77_pins {
+	bias-pull-up;
+	input-disable;
+};
+
+&gpio79_pins {
+	bias-disable;
+	input-disable;
+};
+
+&gpio80_pins {
+	bias-pull-up;
+	input-disable;
+};
+
+&gpio82_pins {
+	bias-pull-up;
+	input-disable;
+};
+
+&gpio84_pins {
+	bias-disable;
+	input-disable;
+};
+
+&gpio85_pins {
+	bias-pull-up;
+	input-disable;
+};
+
+&gpio94_pins {
+	bias-disable;
+	input-disable;
+};
+
+&gpio106_pins {
+	bias-disable;
+	input-disable;
+};
+
+&gpio111_pins {
+	bias-disable;
+	input-disable;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&aon_i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+};
+
+&aon_i2c1 {
+	status = "okay";
+
+	pac1934@10 {
+		compatible = "microchip,pac1934";
+		reg = <0x10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <0x1>;
+			shunt-resistor-micro-ohms = <1000>;
+			label = "VDD_SOM";
+		};
+
+		channel@2 {
+			reg = <0x2>;
+			shunt-resistor-micro-ohms = <1000>;
+			label = "VDD_SOC";
+		};
+
+		channel@3 {
+			reg = <0x3>;
+			shunt-resistor-micro-ohms = <1000>;
+			label = "VDD_CPU";
+		};
+
+		channel@4 {
+			reg = <0x4>;
+			shunt-resistor-micro-ohms = <1000>;
+			label = "VDD_LPDDR";
+		};
+	};
+
+	ina226@44 {
+		compatible = "ti,ina226";
+		reg = <0x44>;
+		#io-channel-cells = <1>;
+		label = "sys_power";
+		shunt-resistor = <1000>;
+	};
+};
+
+&pinctrl {
+	vrgmii-supply = <&vcc_1v8>;
+};
+
+&sdhci_emmc {
+	eswin,drive-impedance-ohms = <50>;
+	mmc-hs400-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&sdio0 {
+	eswin,drive-impedance-ohms = <33>;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&sdio1 {
+	eswin,drive-impedance-ohms = <33>;
+	no-mmc;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&gmac0 {
+	phy-handle = <&gmac0_phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio106_pins>;
+	rx-internal-delay-ps = <20>;
+	tx-internal-delay-ps = <100>;
+	status = "okay";
+};
+
+&gmac0_mdio {
+	gmac0_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0>;
+		reset-gpios = <&gpioD 10 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+	};
+};
+
+&gmac1 {
+	phy-handle = <&gmac1_phy0>;
+	phy-mode = "rgmii-rxid";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio111_pins>;
+	rx-internal-delay-ps = <200>;
+	tx-internal-delay-ps = <200>;
+	status = "okay";
+};
+
+&gmac1_mdio {
+	gmac1_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0>;
+		reset-gpios = <&gpioD 15 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
 };
 
 &uart0 {
@@ -27,3 +300,11 @@
 &uart2 {
 	status = "okay";
 };
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};