[WB] Add hardware semaphore management for RCC

WB serie will require more semaphore management for
low power and flash.

Signed-off-by: Frederic Pillon <[email protected]>

Author: fpistm

libraries/SrcWrapper/src/stm32/clock.c

@@ -12,6 +12,7 @@
  */
 #include "backup.h"
 #include "clock.h"
+#include "lock_resource.h"
 #include "otp.h"
 #include "stm32yyxx_ll_cortex.h"
 #include "stm32yyxx_ll_rcc.h"
@@ -131,9 +132,11 @@ void enableClock(sourceClock_t source)
       break;
   }
   if (RCC_OscInitStruct.OscillatorType != RCC_OSCILLATORTYPE_NONE) {
+    hsem_lock(CFG_HW_RCC_SEMID, HSEM_LOCK_DEFAULT_RETRY);
     if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
       Error_Handler();
     }
+    hsem_unlock(CFG_HW_RCC_SEMID);
   }
 }
 

libraries/SrcWrapper/src/stm32/uart.c

@@ -1,39 +1,17 @@
-/**
-  ******************************************************************************
-  * @file    uart.c
-  * @author  WI6LABS, fpistm
-  * @brief   provide the UART interface
-  *
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
+/*
+ *******************************************************************************
+ * Copyright (c) 2016-2021, STMicroelectronics
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
+ *
+ *******************************************************************************
+ */
 #include "core_debug.h"
+#include "lock_resource.h"
 #include "uart.h"
 #include "Arduino.h"
 #include "PinAF_STM32F1.h"
@@ -528,6 +506,7 @@ void uart_config_lowpower(serial_t *obj)
   /* Ensure HSI clock is enable */
   enableClock(HSI_CLOCK);
 
+  hsem_lock(CFG_HW_RCC_CRRCR_CCIPR_SEMID, HSEM_LOCK_DEFAULT_RETRY);
   /* Configure HSI as source clock for low power wakeup clock */
   switch (obj->index) {
 #if defined(USART1_BASE)
@@ -573,6 +552,7 @@ void uart_config_lowpower(serial_t *obj)
       break;
 #endif
   }
+  hsem_unlock(CFG_HW_RCC_CRRCR_CCIPR_SEMID);
 }
 #endif
 

variants/PNUCLEO_WB55RG/variant.cpp

@@ -17,6 +17,7 @@
 */
 
 #include "pins_arduino.h"
+#include "lock_resource.h"
 
 #ifdef __cplusplus
 extern "C" {
@@ -99,9 +100,15 @@ WEAK void SystemClock_Config(void)
   RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
   RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {};
 
+  /* This prevents concurrent access to RCC registers by CPU2 (M0+) */
+  hsem_lock(CFG_HW_RCC_SEMID, HSEM_LOCK_DEFAULT_RETRY);
+
   __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW);
   __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
 
+  /* This prevents the CPU2 (M0+) to disable the HSI48 oscillator */
+  hsem_lock(CFG_HW_CLK48_CONFIG_SEMID, HSEM_LOCK_DEFAULT_RETRY);
+
   /* Initializes the CPU, AHB and APB busses clocks */
   RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSI48
                                      | RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_LSE;
@@ -149,6 +156,7 @@ WEAK void SystemClock_Config(void)
   /* Select HSI as system clock source after Wake Up from Stop mode */
   LL_RCC_SetClkAfterWakeFromStop(LL_RCC_STOP_WAKEUPCLOCK_HSI);
 
+  hsem_unlock(CFG_HW_RCC_SEMID);
 }
 
 #ifdef __cplusplus