ci(pre-commit): Apply automatic fixes

Author: pre-commit-ci-lite[bot]

cores/esp32/esp32-hal-rmt.c

@@ -58,12 +58,12 @@ struct rmt_obj_s {
   uint32_t signal_range_min_ns;  // RX Filter data - Low Pass pulse width
   uint32_t signal_range_max_ns;  // RX idle time that defines end of reading
 
-  EventGroupHandle_t rmt_events;  // read/write done event RMT callback handle
-  bool rmt_ch_is_looping;         // Is this RMT TX Channel in LOOPING MODE?
-  size_t *num_symbols_read;       // Pointer to the number of RMT symbol read by IDF RMT RX Done
-  rmt_reserve_memsize_t mem_size; // RMT Memory size
-  uint32_t frequency_Hz;          // RMT Frequency
-  uint8_t rmt_EOT_Level;          // RMT End of Transmission Level - default is LOW
+  EventGroupHandle_t rmt_events;   // read/write done event RMT callback handle
+  bool rmt_ch_is_looping;          // Is this RMT TX Channel in LOOPING MODE?
+  size_t *num_symbols_read;        // Pointer to the number of RMT symbol read by IDF RMT RX Done
+  rmt_reserve_memsize_t mem_size;  // RMT Memory size
+  uint32_t frequency_Hz;           // RMT Frequency
+  uint8_t rmt_EOT_Level;           // RMT End of Transmission Level - default is LOW
 
 #if !CONFIG_DISABLE_HAL_LOCKS
   SemaphoreHandle_t g_rmt_objlocks;  // Channel Semaphore Lock
@@ -470,9 +470,9 @@ bool rmtInit(int pin, rmt_ch_dir_t channel_direction, rmt_reserve_memsize_t mem_
   peripheral_bus_type_t rmt_bus_type = perimanGetPinBusType(pin);
   if (rmt_bus_type == ESP32_BUS_TYPE_RMT_TX || rmt_bus_type == ESP32_BUS_TYPE_RMT_RX) {
     rmt_ch_dir_t bus_rmt_dir = rmt_bus_type == ESP32_BUS_TYPE_RMT_TX ? RMT_TX_MODE : RMT_RX_MODE;
-    bus = (rmt_bus_handle_t) perimanGetPinBus(pin, rmt_bus_type);
+    bus = (rmt_bus_handle_t)perimanGetPinBus(pin, rmt_bus_type);
     if (bus->frequency_Hz == frequency_Hz && bus_rmt_dir == channel_direction && bus->mem_size == mem_size) {
-      return true; // already initialized with the same parameters
+      return true;  // already initialized with the same parameters
     }
   }