ci(pre-commit): Apply automatic fixes

Author: pre-commit-ci-lite[bot]

tests/validation/gpio/esp32.diagram.json

@@ -25,4 +25,4 @@
     [ "btn1:2.r", "esp32:GND.1", "black", [ "h19.4", "v173", "h-269.2", "v-98.23" ] ]
   ],
   "dependencies": {}
-}
+}

tests/validation/gpio/esp32c3.diagram.json

@@ -25,4 +25,4 @@
     [ "btn1:2.r", "esp32:GND.1", "black", [ "h19.4", "v173", "h-269.2", "v-98.23" ] ]
   ],
   "dependencies": {}
-}
+}

tests/validation/gpio/esp32c6.diagram.json

@@ -25,4 +25,4 @@
     [ "btn1:2.r", "esp32:GND.1", "black", [ "h19.4", "v173", "h-269.2", "v-98.23" ] ]
   ],
   "dependencies": {}
-}
+}

tests/validation/gpio/esp32h2.diagram.json

@@ -25,4 +25,4 @@
     [ "btn1:2.r", "esp32:GND.1", "black", [ "h19.4", "v173", "h-269.2", "v-98.23" ] ]
   ],
   "dependencies": {}
-}
+}

tests/validation/gpio/esp32s2.diagram.json

@@ -25,4 +25,4 @@
     [ "btn1:2.r", "esp32:GND.1", "black", [ "h19.4", "v173", "h-269.2", "v-98.23" ] ]
   ],
   "dependencies": {}
-}
+}

tests/validation/gpio/esp32s3.diagram.json

@@ -25,4 +25,4 @@
     [ "btn1:2.r", "esp32:GND.1", "black", [ "h19.4", "v221", "h-269.2", "v-57.42" ] ]
   ],
   "dependencies": {}
-}
+}

tests/validation/gpio/gpio.ino

@@ -3,36 +3,29 @@
 
 #define BTN 0
 
-void test_button()
-{
+void test_button() {
   Serial.println("Button test");
   static int count = 0;
   static int lastState = HIGH;
-  while(count < 3)
-  {
+  while (count < 3) {
     int state = digitalRead(BTN);
-    if (state != lastState)
-    {
-        if (state == LOW)
-        {
+    if (state != lastState) {
+      if (state == LOW) {
         count++;
         Serial.print("Button pressed ");
         Serial.print(count);
         Serial.println(" times");
-        }
-        lastState = state;
+      }
+      lastState = state;
     }
     delay(10);
   }
 }
 
-void setup()
-{
+void setup() {
   Serial.begin(115200);
   pinMode(BTN, INPUT_PULLUP);
   test_button();
 }
 
-void loop()
-{
-}
+void loop() {}

tests/validation/gpio/scenario.yaml

@@ -3,7 +3,7 @@ version: 1
 author: Jan Prochazka ([email protected])
 
 steps:
-  - wait-serial: 'Button test'
+  - wait-serial: "Button test"
 
   # Need for 1s delay for scenario to run properly
   - delay: 1000ms
@@ -37,4 +37,4 @@ steps:
       part-id: btn1
       control: pressed
       value: 1
-  - wait-serial: 'Button pressed 3 times'
+  - wait-serial: "Button pressed 3 times"

tests/validation/wifi/test_wifi.py

@@ -1,3 +1,3 @@
 def test_wifi(dut):
     dut.expect_exact("WiFi connected")
-    dut.expect_exact("IP address:")
+    dut.expect_exact("IP address:")

tests/validation/wifi/wifi.ino

@@ -121,4 +121,4 @@ void setup() {
 
 void loop() {
   delay(1000);
-}
+}